Filter
Top Products
4. Installation
Image 4-24
1 Function keys
user programmable keys with functions f
or direct access.
2 MENU Menu key, to enter or exit the Tool bar menu
.
3 Address key
(recessed key), to enter the address of the projector (between 0 and 9). Press the recessed
address key with a pencil, followed by pressing one digit button between 0 and 9.
4
LOGO key
not implemented
5
PAUSE to stop projection for a short time, press ’PAUSE’. The image disappears but full power is
retained for immediate restarting.
6
STBY standby button, to start projector whe
n the power switch is switched on and to switch off the
projector without switching off the power switch.
Attention : Switching to Standby. When the projector is running and you want to
go to standby, press the standby key for 2 seconds.
7
MUTE
to interrupt the sound reproduction (audio = optional.
8
AUTOIMAGE Auto image, to center the image on th
eactiveLCDsurface.
9 Digit buttons direct input selection.
9b
SOURCE button the Source Selection menu is opened
10 Lens control
use these buttons to obtain the desired ZOOM, SHIFT, FOCUS.
11
VOL use this button to obtain the desire
d sound level (audio = optional)
12 Picture controls use these buttons to obtain the desir
ed picture analog level.
R5976821 BARCO ICON 15/03/2007 31