Barco H600 Projector User Manual


 
8. Advanced
How to reset the lamp runtime ?
1. Press MENU to activate the Toolbar
2. Press to select the Lamp item
3. Press to Pull down the Lamp menu
4. Use or to select Reset runtime
5. Press to pull down the menu
6. Use or toselectthelamptobereset
Image 8-50
7. Press ENTER
A dialogbox is displayed
Image 8-51
8. Use or , the numeric keys on the remote, or the keypad to enter the serial number of the new lamp (serial number 0000000
will not be accepted).
8.5.5 Clear lamp error
Lamp error
When a failure of one of the lamps has occurred, a
lamp logo is displayed in the left corner of the screen. This logo will thus always
inform the user on a previous lamp error.
Image 8-52
Once the error has been solved or/and the lamp has been replaced one can remove (clear) the lamp error.
If the error has been cleared wi
thout solving the lamp problem the logo will be shown at next lamp startup (projector startup for
example)
R5976821 BARCO ICON 15/03/2007
101