Filter
Top Products
5. Setup
A textbox appears on the screen, follow the instructions.
Image 5-13 Image 5-14
The use of a sheet o
f paper held in front of the screen can be useful to determine the focus plane (position
for best focus)
Vertical shift range : -120% to 120%
Horizontal sh
ift range : -100% to +100%
5.7 Setup the baudrate for serial communication
What can be done ?
The RS232 IN port of the projector allows you to communicate with any other equipment disposing of an RS232 port (generally a
PC used to upgrade the projector’s firmware) using the RS232 protocol. The baudrate must be set to the same value on both the
projector and the other equipment.
How to change the baudrate?
1. Press MENU to activate the Tool bar
2. Press → to select the Installation item
3. Press
↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select RS232 baudrate
Image 5-15
5. Press → to pull down the menu
R5976821 BARCO ICON 15/03/2007
39