Filter
Top Products
724-746-5500 | blackbox.com
Page 20
724-746-5500 | blackbox.com
Chapter 4: On-Screen Display
VIDEO (continued) CROPPING Crop the display of video sources
BRIGHTNESS Set brightness of analog input signal
CONTRAST Set contrast of analog input signal
HORIZ POSITION Horizontal screen position
VERT POSITION Vertical screen position
SCREEN WIDTH Set screen width of analog input signal
PHASE Adjust phase of analog input signal
FORMAT Fit input format to screen
COMPUTER CHANNEL MAPPING Assign an input port to a channel
AUDIO Enable audio output/Audio source selection/Volume
NAME 1–4 Assign computer names
KEYBOARD Display type of keyboard (PC1, PC2, PC3, or USB)
MOUSE Display type of mouse (PS/2, PS/2 Wheel, or USB)
Set USB mouse positioning (absolute/relative)
RESET PS/2 Reset PS/2 mouse and keyboard
EDID/DDC Program input EDID
USB DEVICE 1-4 USB PORT STATUS Shows USB 2.0 matrix status and allows
USB ports to be assigned to a device
HELP ABOUT Firmware / hardware version, serial number, etc
HOTKEY List of keyboard commands
CONTACT Contact information
4.2 OSD—Main Menu Window
There are three ways to open the OSD main menu (Figure 4-2):
1. Use a keyboard command: “hotkey“ + “O.” (letter “O”)
2. Simultaneously press front-panel buttons “PiP“ + “Win“ for longer than one second.
3. Remotely open the OSD via ConfDev program on an external PC with serial or USB connection.