Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 41
Chapter 5: OSD Mode
One channel is selected to be displayed as permanent full image (active channel).
Only the PiP can be switched. Press front-panel buttons 1, 2, 3, or 4 to switch the full image.
Single scan:
Figure 5-10. Single scan mode.
Within a PiP image, when the three other video sources are displayed one after the other, the delay can be set to between one
and nine seconds.
Figure 5-11. PiP video sources displayed one after the other.