Filter
Top Products
724-746-5500 | blackbox.com
Page 94
724-746-5500 | blackbox.com
Appendix C: Update ServSwitch 4site Flex Firmware
Figure C-2. Update firmware screen.
2. Start the executable firmware file.
3. Set the desired COM port.
4. Press “Update.”
LEDs 1–4 on the front panel of the ServSwitch 4site Flex flash (blue) during the update.
Additionally, the upgrade process is indicated by an OSD window on your remote computer.
Figure C-3. OSD update screen.
After successful update, ServSwitch 4site Flex restarts without changing configuration.