Filter
Top Products
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 45
Chapter 6: OSD Configuration
6.3 Factory Reset/Defaults
Navigate with the arrow keys in the CONFIGURATION menu to the Factory Reset
Press ENTER/SELECT to open the DEFAULTS window.
Figure 6-3. Configuration>Factory Reset screen.
Use this function to reset the current settings of ServSwitch 4site Flex to the factory default configuration. All four input EDIDs are
also reset to their default values.
If necessary, save your current settings before using the DEFAULTS command. Execution of this command results in a complete
reset and reboot of ServSwitch 4site Flex with factory defaults.
FACTORY DEFAULTS:
SYSTEM HOTKEY = Multiple Hotkey / Hotkey = Ctrl + Alt
HOTMOUSE = ON / Hotmouse timeout = 5 sec.
QUAD MODE = Channel selection timeout = 5 sec.
WIN MODE = Border width = 0 sec.
Active channel= 255,255,0
Active channel= 255,136,0
OSD POSITION = centered
OSD LANGUAGE = English
SECURITY = None (security level = 0)
DISABLE CHANNEL = All four channels are active
CONTROL = Off
MODE CURRENT = Active channel = 1, quad
START = Active channel = 1, quad
> PIP Size = 15 % Zoom factor = 1
Display mode = triple Active channel = gap;
Offset from top = 0 %
>WIN = Channel: 1, Mode:win1, Position settings depend on the
source, Aspect ratio: enabled