Filter
Top Products
10-710-7
10-710-7
10-7
REMOTE FAX OPTIONS
3550-US-5.0
Ch.10Ch.10
Ch.10Ch.10
Ch.10
Remote Control CommandsRemote Control Commands
Remote Control CommandsRemote Control Commands
Remote Control Commands
You can control your fax machine with the following remote control commands.
95 Changing Fax Forwarding
/Paging setting
1 OFF
2 Fax Forwarding
3 Paging
4 FAX FWD No.
5 FWD No. Confirm
6 Fax Storage ON
7 Fax Storage OFF
96 Retrieve FAX
1 Memory Status List
2 00 Retrieve all FAXES
2 “MSG No.” 00
Retrieve by MSG
number
3 Erase FAX in the
memory
97 Check the receiving status
1 FAX
98 Change Answer Mode
1 TAD
2 F/T
3 Fax
90 Exit
Remote control command Detail Operation
If you hear one long beep, the change is accepted. If you hear three
short beeps, you can not change it because the conditions (ex.
registering fax forwarding or paging number) have not been com-
pleted. You can register your fax forwarding number by using 4.
FAX FWD No. (see page 10-8). Once you have registered the number,
the machine automatically will turn to FAX FWD:ON mode. To
receive a Memory Status List, enter 961 (see page 10-8). Check the
List to make sure the Fax Forwarding number you registered is
correct. Then enter the confirmation command 955. Now the ma-
chine will start Fax Forwarding.
You can set FAX STORAGE ON or OFF.
You must call from a remote fax machine to receive the Memory
Status List or stored fax message(s). (See page 10-8.)
If you hear one long beep, you can erase fax message(s) from the
memory.
You can check whether your fax machine has received any fax
message(s). If yes, you will hear one long beep. If no, you will hear
three short beeps.
If you hear one long beep, you can change the Answer Mode. If you
hear three short beeps, you can not change it.
After a long beep, you can exit remote control.
FAX IN MEMORY:03
1.TEMP.SETTINGS
8.REMOTE FAX OPT
4.PRINT FAX
PRESS START KEY
PRINTING
4.PRINT FAX
Printing a Fax MessagePrinting a Fax Message
Printing a Fax MessagePrinting a Fax Message
Printing a Fax Message
You can print a fax message that is stored in the memory.
1. Press Function.
2. Press 8.
3. Press 4.
4. Press Start.
5. Press Stop to exit.
KEYS TO PRESS THE DISPLAY WILL SHOW: