Filter
Top Products
3-23-2
3-23-2
3-2
HOW TO USE ON-SCREEN PROGRAMMING (OSP) AND HELP KEY
3550-US-5.0
SPEAKER:HIGH
These function options will appear one after the other on the display. You can then choose one of
these options by pressing
SetSet
SetSet
S e t when the option you want appears on the LCD.
You can also move through the function menu options at a faster rate by pressing X (right
arrow).
(See page 2-4 to locate this key on your Control Panel.) When you find the option you want,
press
SetSet
SetSet
Set.
You can simply press the Level One Function number associated with each option (refer to pages
3-2 through 3-6).
Helpful Hints
If you want to exit function mode, simply press
StopStop
StopStop
Stop. Also, if you select the
wrong menu, and wish to return to the previous step, press
ClearClear
ClearClear
Clear.
Alternating Displays for On-screen Programming (OSP)Alternating Displays for On-screen Programming (OSP)
Alternating Displays for On-screen Programming (OSP)Alternating Displays for On-screen Programming (OSP)
Alternating Displays for On-screen Programming (OSP)
When you see alternating displays, the LCD will
usually alternate between the currently selected
option, and a help message giving brief instructions
on how to proceed. The example shows the current
speaker volume is high and prompts you to use Z
(left arrow) and X (right arrow) to change the
setting, and then to press
SetSet
SetSet
S e t to store it.
SELECT { } & SET
ALTERNATE
Function Selection TableFunction Selection Table
Function Selection TableFunction Selection Table
Function Selection Table
If you have a basic understanding of how to program a fax machine, you can perform most of the
programming settings without the Owner’s Manual. To help you understand the function
selections, options, and settings that are found in your fax programs, we have the following
Function Selection Table.
Read through this table to gain a basic understanding of what your new fax model can do, and
then the next section will begin instructing you how to use On-Screen Programming.
Level one
function
Level two
function
Explanation of Options
Factory
setting
Page
Use TIMER to send your documents at a
later time.
Polling is the process of retrieving faxes
from another machine. ON/OFF
You can send a fax and then talk to the
recipient using the CALL RESERVE
function. ON/OFF.
1. TIMER
2. POLLING
3. CALL
RESERVE
6-7~8
1. TEMP.
(TEMPORARY)
SETTINGS
OFF
9-1~4
OFF
6-18~19