Filter
Top Products
7-27-2
7-27-2
7-2
Ch. 7Ch. 7
Ch. 7Ch. 7
Ch. 7
3550-US-5.0
THE DISPLAY WILL SHOW:KEYS TO PRESS
1. Press Function.
2. Press 6.
3. Press 2.
4. Press Z
(left arrow) or X (right
arrow) repeatedly until you find
the number of rings you want.
Example: 00.
When you set 00, you can receive your
incoming faxes with no rings.
5. Press Set.
6. Press Stop to exit.
Manual Reception (Manual Mode)Manual Reception (Manual Mode)
Manual Reception (Manual Mode)Manual Reception (Manual Mode)
Manual Reception (Manual Mode)
When you set the Answer Mode to Manual, you must answer each incoming call yourself. Here
is what you should do when using Manual Mode:
If You Get a... Then You Should...
1. Regular phone call Talk as you normally would.
2. Phone call and request Press
StartStart
StartStart
Start when finished talking, and replace the handset.
to send a fax Note: Sender must also press
StartStart
StartStart
Start.
3. Fax tone... Press
StartStart
StartStart
Start, and replace the handset.
Automatic Fax Reception (Fax Mode)Automatic Fax Reception (Fax Mode)
Automatic Fax Reception (Fax Mode)Automatic Fax Reception (Fax Mode)
Automatic Fax Reception (Fax Mode)
You can automatically receive all your faxes in Automatic Fax Reception mode (Fax light is ON).
Select this mode by pressing
ModeMode
ModeMode
Mode.
Setting the Ring DelaySetting the Ring Delay
Setting the Ring DelaySetting the Ring Delay
Setting the Ring Delay
You can set the number of rings before the fax machine will answer the line.
09/12/1996 15:25
1.TEMP.SETTINGS
6.TEL OPTIONS
2.RING DELAY
RING DELAY:02
SELECT { } & SET
2.RING DELAY
RING DELAY:00
BASIC SETUP TO RECEIVE FAXES
RECEIVING FAXES AND OTHER CALLS