Filter
Top Products
14-3
IMPORTANT INFORMATION
3550-US-5.0
Ch.14
International Energy Star Compliance Statement
The purpose of the International Energy Star Program is to promote the development and
popularization of energy-efficient office equipments, which includes computers, monitors,
printers, facsimile receivers and copy machines world-wide.
As an International Energy Star partner, Brother Industries, Ltd. has decided that this
product meets the guideline of the program.
Brother can not accept any financial or other responsibilities that may be the result
of your use of this information, including direct, special or consequential damages.
There are no warranties extended or granted by this document.
The serial number may be found on the label affixed to the back of the unit. For your convenience,
note the number below and retain this Owner’s Manual to serve as a permanent record of your
purchase, in the event of a theft or fire, or for future reference.
MODEL NO. IntelliFAX3550 SERIAL NO. _____________________________________
NAME OF DEALER ______________________________________________________
DATE OF PURCHASE ____________________________________________________
Important Safety Instructions
1. Read all of these instructions
2. Save them for later reference.
3. Follow all warnings and instructions marked on the product.
4. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
5. Do not use this product near water.
6. Do not place this product on an unstable cart, stand, or table. The product may fall, causing
serious damage to the product.
7. Slots and openings in the cabinet and the back or bottom are provided for ventilation; to
ensure reliable operation of the product and to protect it from overheating, these openings
must not be blocked or covered. The openings should never be blocked by placing the product
on a bed, sofa, rug, or other similar surface. This product should never be placed near or over
a radiator or heater. This product should not be placed in a built-in installation unless proper
ventilation is provided.