Filter
Top Products
3-53-5
3-53-5
3-5
HOW TO USE ON-SCREEN PROGRAMMING (OSP) AND HELP KEY
3550-US-5.0
Ch. 3Ch. 3
Ch. 3Ch. 3
Ch. 3
Page
Level one
function
Factory
setting
Level two
function
Explanation of Options
7-222. RING DELAY
1. TONE/PULSE TONE 4-1
6. DISTINCTIVE
3. INTERVAL
OFF 11-2
~3
00:00 6-7
2. DAILY TIMER
1. DATE/TIME
01/01/1997
00:00
4-2
7-20
7. CALLER ID
OFF
7-17~18
HIGH
7-9
5. RING VOLUME
4. F/T RING
TIME
20 7-4
3. SPEAKER
VOLUME
LOW 7-9
6. TEL
OPTIONS
There are two different dial types and you
must select the type of signal suitable for
your telephone line.
TONE/PULSE
This is the number of rings before the fax
machine answers the call when in F/T or Fax
Mode.
0/1/2/3/4 rings
You can adjust the speaker volume with this
function.
OFF/LOW/HIGH
F/T RING TIME sets the time for simulated
ringing in F/T mode.
10/20/30/60 seconds
The settings are OFF/LOW/HIGH.
If you have distinctive ringing service from
your phone company, you can use this
function to register the ringing pattern of
your fax number. And if you set it to ON, you
can use the registered number as a fax
number only.
OFF/ON/SET
You can display the last 30 Caller IDs that
are stored in the memory.
If you enter the date and time in 24-hour
format, the LCD will display the date and
time and they will be printed on outgoing
faxes.
If you frequently have delayed jobs, all for
execution at same time each day, you can
program that time. Once you register it, you
do not need to enter that time, just set Timer
Transmission in temporary settings.
You can select the time interval at which the
activity report is printed.
6/12/24 hours, 2/4/7 days, OFF
You can enter your name or company name,
fax number and telephone number in
STATION ID.
It is printed at the top of each page of every
outgoing fax. It is also printed on the
automatic Cover Page.
4. STATION ID
4-3
7. SETUP
SYSTEM