7-137-13
7-137-13
7-13
3550-US-5.0
LINE
EXT.
NO !
TAD TAD
Connecting an External TAD to the UnitConnecting an External TAD to the Unit
Connecting an External TAD to the UnitConnecting an External TAD to the Unit
Connecting an External TAD to the Unit
You may connect an external TAD to your fax machine, as shown below. Use the
“EXT.” jack on your fax machine.
FOR YOUR INFORMATION
--
--
-
Do not connect a TAD elsewhere on theDo not connect a TAD elsewhere on the
Do not connect a TAD elsewhere on theDo not connect a TAD elsewhere on the
Do not connect a TAD elsewhere on the
same phone line. This will causesame phone line. This will cause
same phone line. This will causesame phone line. This will cause
same phone line. This will cause
problems because your fax machine andproblems because your fax machine and
problems because your fax machine andproblems because your fax machine and
problems because your fax machine and
TAD will both try to control the line.TAD will both try to control the line.
TAD will both try to control the line.TAD will both try to control the line.
TAD will both try to control the line.
C)C)
C)C)
C)
CONNECTING A TELEPHONE ANSWERING DEVICECONNECTING A TELEPHONE ANSWERING DEVICE
CONNECTING A TELEPHONE ANSWERING DEVICECONNECTING A TELEPHONE ANSWERING DEVICE
CONNECTING A TELEPHONE ANSWERING DEVICE
(TAD)(TAD)
(TAD)(TAD)
(TAD)
How to Use an External TAD with the FaxHow to Use an External TAD with the Fax
How to Use an External TAD with the FaxHow to Use an External TAD with the Fax
How to Use an External TAD with the Fax
When you have a Telephone Answering Device on the fax phone line, the TAD will answer all the
incoming calls. Your Brother fax machine will listen in on the line for fax CNG tones. If it hears
them, it will take over the call and receive the fax message. If it does not hear fax tones, it will
let the TAD continue playing the outgoing message so the caller can leave a voice message.
The TAD must answer within 4 rings (2 rings are recommended). The fax machine can not hear
the CNG calling tones until the TAD answers the call. When the Ring Delay is set for 4 rings, only
8-10 seconds of CNG calling tones are left for the “handshake”. So you must strictly follow the
instructions for recording your OGM.
You must erase the incoming messages frequently on your TAD. When the TAD’s memory is full
it will not answer any incoming calls (fax or voice).
Set your fax machine’s answer mode to TAD (Fax and F/T lights on).
CONNECTING A TELEPHONE ANSWERING DEVICE (TAD)
RECEIVING FAXES AND OTHER CALLS