Filter
Top Products
10-510-5
10-510-5
10-5
REMOTE FAX OPTIONS
3550-US-5.0
Ch.10Ch.10
Ch.10Ch.10
Ch.10
6. Enter a fax forwarding number up
to 20 digits.
Example: 18005551234.
7. Press Set.
8. Press Stop to exit.
WD#:18005551234_
2.FAX FWD/PAGING
What Is Remote Control Access?What Is Remote Control Access?
What Is Remote Control Access?What Is Remote Control Access?
What Is Remote Control Access?
When you leave your home or office, you will turn on your FAX STORAGE to receive fax messages.
(See page 10-1.) But if you would like to activate or deactivate this FAX STORAGE feature, you
can control and program your fax by remote control. You can call your fax from any touch tone
phone, enter your remote access code, followed by programming commands.
Setting the Remote Access CodeSetting the Remote Access Code
Setting the Remote Access CodeSetting the Remote Access Code
Setting the Remote Access Code
The initial setting for the remote access code on your new fax is “159*”. When you use the Remote
Access Code, you must press all four keys (three-digit number plus *). Change the remote control
code and use it as a "secret password" to limit access to your REMOTE FAX OPTIONS.
3.REMOTE ACCESS
ACCESS CODE:160*
ACCESS CODE:159*
3.REMOTE ACCESS
8.REMOTE FAX OPT
09/12/1996 15:25
1.TEMP.SETTINGS
1. Press Function.
2. Press 8.
3. Press 3.
4. Enter a three digit number 000 to
999. The last digit, an asterisk, can
not be changed.
Example: 160*.
The three digit number must not be the
same as the remote activation and
deactivation codes. (See page 7-11~12.)
Example: When the remote access code
is 160*, don’t use 160 or 60* for the
activation and deactivation code.
5. Wait for two seconds.
6. Press Stop to exit.
KEYS TO PRESS
THE DISPLAY WILL SHOW: