Filter
Top Products
6-8
3550-US-5.0
2. Press Super Q.Scan if you wish
to use memory transmission, or
you can send your fax normally.
3. Press Function.
4. Press 1.
5. Press 1.
6. Enter the time in 24-hour format
using the number keys.
Example: 19:45 (7:45 P.M.).
7. Wait for two seconds.
1.TEMP.SETTINGS
1.TIMER
1.TEMP.SETTINGS
SET TIME=19:45
1.TIMER
SET TIME=
00:00
MEMORY 100%
ENTER FAX NO.
Broadcasting
By using the numbers you have stored for One-Touch dialing, Speed-Dialing, or group dialing, you
can automatically send faxes to a maximum of 140 different locations at once. Remember, each
group you created reserves one of the One-Touch keys. You can not broadcast to a number that
has not been stored in memory. Use the Telephone Index to help you choose the numbers to which
you wish to broadcast. (See page 5-2.)
After transmission is completed, a Broadcast Report will be printed automatically to let you know
the results.
8. Press Stop.
9. Enter the fax number.
10
.Press Start.
The fax machine will wait until the
specified time to call.
NJ OFFICE
09/12/1996 15:25
ENTER FAX NO.
MEMORY 100%
SENDING FAXES ADVANCED FAX TRANSMISSIONS
FOR YOUR INFORMATION
Getting Familiar with the Broadcasting Function
* To stop the broadcast in progress, press Stop.
* Enter the chain dialing numbers as you normally would, but keep in mind that
each key counts as one location, so the number of locations you can call becomes
limited. (You have up to 140 locations you can call with One-Touch, Speed-
Dialing, and group numbers.)
* If the line is busy or for some other reason a connection could not be made while
broadcasting, the fax machine will redial the number automatically. (See page
6-5.)
* If the memory is full, press Stop to abort the job or press Start to send the portion
that is in the memory (if more than one page has been scanned.) (See page 6-7.)