Confidential
3-153
8.40 Laser Unit/ Hook Slope
(1) Remove the four cup S M3x8 Taptite screws, and then remove the two Hook slopes.
Fig. 3-220
(2) Remove the nine cup S M3x6 Taptite screws (8 pieces from the top and 1 piece from the
Front), and then remove the Scanner cover.
Fig. 3-221
Assembling Note:
When assembling the Scanner cover, secure the screws in the order of the numbers which
are indicated on the Scanner cover.
Hook slope
Hook slope
Taptite, cup S M3x8
Frame unit
Taptite, cup S M3x8
Scanner cover
Taptite, cup S M3x6
Taptite, cup S M3x6
Taptite, cup S M3x6
Taptite, cup S M3x6
Frame unit
<Front>
<Front>