Filter
Top Products
Confidential
5-6
1.4.3 Placement of Scanner Unit in Position for Transportation (Function code 06)
<Function>
This function is to move the scanner unit in position for transportation located at the left end.
When you fix the machine and check its operation, you need to perform this function last before
packing and shipping.
Note:
Please instruct end users to perform this function if possible before packing and shipping their
FAX machine to a sales agent or a service dealer for the purpose of repair. (For the procedure
to allow users to perform maintenance modes, refer to “1.2 How to Enter the End User-
accessible Maintenance Mode” in this chapter.
<Operating Procedure>
(1) Press the 0 and 6 buttons in this order in the initial stage of the maintenance mode.
The scanner unit moves to the designated position for transportation located at the left
end. The “MAINTENANCE 06” is displayed until the scanner unit is placed in position.
When the scanner unit is placed in the position, the “PLEASE SCAN LOCK” appears on
the LCD.
(2) Move the scanner lock lever on the left hand side of the FB unit to the position to lock the
scanner unit.
The “SCAN LOCKED” will appear on the LCD.
(3) Press the Stop/Exit button. The machine beeps for one second and returns to the initial
stage of the maintenance mode.
Note:
- If it is impossible to move the scanner unit in position for transportation, or if this function is
performed while a scanning error is occurring, the “SCAN LOCK ERROR” appears on the
LCD.
- You can not perform the scanning operation such as copying after moving the scanner unit
into the position for transportation.
1.4.4 ADF Performance Test (Function code 08)
<Function>
The machine counts the documents fed by the automatic document feeder (ADF) and displays
the count on the LCD for checking of the ADF performance.
<Operating Procedure>
(1) Set documents. (Allowable up to the ADF capacity.)
The “DOC. READY” will appear on the LCD.
(2) Press the 0 and 8 buttons in this order.
The “
: DX : SX” will appear on the LCD.
(3) Press the
or
button. While counting the documents, the machine feeds them in and
out, displaying the current count on the LCD as shown below.
(4) Press the Stop/Exit button so that the machine beeps for one second and returns to the
initial stage of the maintenance mode.
Current count (1st page in this example)