Filter
Top Products
Confidential
App. 1-34
< WSW29 >
Selector No. Function Setting and Specifications
1
|
3
Compression threshold level for
voice signals inputted via the
telephone line in the built-in
TAD operation
No. 1 2 3
0 0 0: -47.0 dBm
0 0 1: -48.5 dBm
0 1 0: -50.0 dBm
0 1 1: -51.5 dBm
1 0 0: -53.0 dBm
1 0 1: -54.5 dBm
1 1 0: -56.0 dBm
1 1 1: OFF
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
4
|
6
Compression threshold level for
voice signals inputted via the
handset in the built-in TAD
operation
No. 4 5 6
0 0 0: -44.0 dBm
0 0 1: -45.5 dBm
0 1 0: -47.0 dBm
0 1 1: -48.5 dBm
1 0 0: -50.0 dBm
1 0 1: -51.5 dBm
1 1 0: -53.0 dBm
1 1 1: OFF
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
7
Impedance switching control in
pulse dialing
0: OFF 1: ON
8
Prompt beep when the memory
area for the activity report
becomes full
0: No 1: Yes
Note:
- Selectors 1 through 6 are applicable to models equipped with built-in TADs.
- Selectors 7 and 8 are applicable only to the European versions.
- Selectors 1 through 6: Compression threshold level for voice signals inputted via the
telephone line in the built-in TAD operation
If voice signals inputted via the telephone line are below the level specified by these
selectors, the TAD interprets those received voice signals as no signal, compressing the
recording time.
- Selector 8: Prompt beep for activity report
This selector determines whether or not to beep if the memory area for the activity report
becomes full, for prompting you to print out the report. (Printing it out will clear the memory
area.)