Filter
Top Products
FOR DOS USERS
12 - 6
Printer Configuration
Other Configuration
Printer Setup Category
Direct Access Category
Item Default What This Item Does
Continue Mode Manual Selects Auto or Manual on Auto error
recovery mode.
Parallel
Bi-directional
Enable Selects the bi-directional parallel “Enable”
or “Disable.”
Item Default What This Item Does
Auto LF Off Selects Auto LF “On or Off”
Auto CR Off Selects Auto CR “On or Off”
Auto Wrap Off Selects Auto Wrap “On or Off”
Auto Skip On Selects Auto Skip “On or Off”
File Function
Send settings Sends the settings made within the RPC to
your MFC.
Load settings Loads the settings you stored in your
CD-ROM or hard disk to the RPC.
Save settings Saves the RPC settings to your CD-ROM or
hard disk.
Save a command Saves the RPC settings to your CD-ROM or
hard disk as a printer command string.
Load Default Loads the default settings to RPC.
Quit Exits.
Item Function
Print Form Prints the MFC’s character/symbol sets
“CHARASET.PRN” or any print files you have made.
Reset Printer Resets the MFC. The data remaining in the MFC and
the printer settings will be cleared.