Filter
Top Products
5 - 3
SETUP RECEIVE
Setting FAX/TEL (F/T) Ring Time
You must determine how long the MFC will notify you with its special double-
ring when you have a voice call. This ringing happens after the initial ringing
from the phone company. Only the MFC rings, for 20, 30, 40 or 70 seconds; no
other phones on the same line ring the special double-ring. However, you can
answer the call on any extension phone (in a separate wall jack) on the same
phone number as the MFC.
1
Press Function, 1, 2, 2.
2
Press or to select how long the MFC will
ring to alert you that you have a voice call,
and then press Set.
3
Press Stop to exit.
Now, when a call comes in and the MFC is set to FAX/TEL mode, all phones
on this line will ring the number of times you selected in Ring Delay.
You can let the MFC pick up and detect if it’s a fax or voice call. If it’s a fax
call, the MFC prints the fax. If it’s a voice call, the MFC signals you with a
double-ring for the length of time you selected in F/T Ring Time.
Easy Receive
When you use this feature, you don’t have to press Start when you answer a fax
call and hear calling beeps. Just hold the handset and wait a few seconds. When
you see RECEIVE on the fax screen or when you hear “chirps” through the
handset of an extension phone connected to another wall jack, just replace the
handset, and your MFC does the rest. Selecting ON allows the MFC to receive
fax calls automatically, even if you lift the handset of an extension or external
phone. Selecting SEMI lets the MFC receive the call only if you’ve answered it
at the MFC. Selecting OFF means you’ll have to activate the MFC yourself by
pressing Start—OR—by pressing 5 1 if you are not at the MFC.
(See
Operation from Extension Telephone or External Telephone, page 5-6.)
1
Press Function, 1, 2, 3.
2
Press or to select ON, SEMI or OFF, and then press Set.
3
Press Stop to exit.
If you’ve set the feature to ON, but your MFC doesn’t automatically connect a
fax call when you lift an external or extension phone handset, press the Fax
Receive code 5 1. At the MFC, lift the handset, and then press Start. (See
For FAX/TEL Mode Only, page 5-6.)
Even if the caller hangs up during the double-ringing, the MFC continues for
the set time.
RING TIME:20 SEC