Filter
Top Products
AUTO DIAL NUMBERS AND DIALING OPTIONS
7 - 6
Broadcasting
Broadcasting is automatically sending the same fax message to multiple fax
numbers. Using the Broadcast key, you can include up to 8 One Touch
locations, up to 30 Speed Dial locations, and up to 50 manually dialed numbers
(maximum of 88 locations if you did not use up any locations for Groups, access
codes or credit card numbers). However, available memory will vary with the
types of jobs in memory and the number of locations used for broadcasting. If
you broadcast to more than the maximum locations available, you will not be
able to set up transmissions using dual access and the timer. (See
Setting Up
Groups for Broadcasting
, page 7-3.)
Although the easiest way to broadcast is to press Group keys, you can include
One Touch, Speed Dial, and manually dialed numbers in the same broadcast.
You must press Broadcast between each of these locations. Use the Telephone
Index to help you choose the numbers easily.
After the broadcast is completed, a Broadcast Report will be printed
automatically to let you know the results.
1
Place the original face down in the ADF.
2
Enter a number using One Touch, Speed Dial, Group numbers, Search or the
dial pad.
Example: Group number
3
Press Broadcast. You will be prompted to press the next number.
4
Enter the next number.
Example: Speed Dial
5
Press Broadcast.
6
Enter the next fax number.
Example: Manual dialing, using the dial pad.
7
Press Start.
Your machine will read the original into memory and then start sending faxes to
all the numbers you entered.
Note
To stop the broadcasting in progress, press Stop. The LCD asks if you want
to cancel all locations or the location that is being sent.
■ Enter the long dialing sequence numbers as you normally would, but keep in mind
that each key counts as one location, so the number of locations you can call
become limited.
■ If the line is busy or for some other reasons a connection could not be made while
broadcasting, the MFC will redial the number automatically.
■ If the memory is full, press Stop to abort the job or press Start to send the portion
that is in the memory (if more than one page has been scanned).