Filter
Top Products
15 - 18
TROUBLESHOOTING AND ROUTINE MAINTENANCE
SETUP.EXE from your CD-ROM drive, following the instructions on the CD-
ROM label. The bi-directional communication may be disabled when the driver
is installed from the Add menu in “Printers” of the Control Panel. Please restart
Windows
®
.
Remove the conflicting situation caused by one of the following printer drivers.
Review the following sections that apply to any additional printer drivers you
may have installed into your Windows
®
software.
Brother HL-6/6V/10h/630series/660series/960/1260/WL-660
HP LaserJet series II, IID, IIP, IIP+, III, IIID, IIIP or IV Plus
NEC SuperScript 610/660
EPSON ActionLaser 1100/1400
LexMark WinWriter 200
Brother HL-6/6V/10h/630series/660series/960/1260/
WL-660:
The Resource Manager for your machine’s Brother printer drivers may not work
if the printer drivers for the above laser printers models are installed after the
installation of your machine’s Brother printer drivers.
In this case, please install your machine’s Brother printer driver again or copy
BI-DI.386 from the CD-ROM to the Windows/System directory.
(NOTE: BI-DI.386 on the CD-ROM is not compressed.)
HP LaserJet series II, IID, IIP, IIP+, III, IIID or IIIP:
If Microsoft Windows
®
Printing System is used for the above models, you must
modify the “win.ini” file in the Windows
®
directory to turn the machine’s
bi-directional function off.
We recommend that you do a back-up before you modify the WIN.INI or
SYSTEM.INI files, just in case.
Open the “win.ini” file using the “Notepad” application. Look for the following
statement in the [spooler] section:
[spooler]
QP.LPT1 = wpsljqp.dll
Then disable this function, by adding a semicolon at the beginning of the above
sentence as follows:
[spooler]
;QP.LPT1 = wpsljqp.dll
Then, open the “system.ini” file using the “Notepad” application. Look for the
following statement in the [386Enh] section:
[386Enh]