Filter
Top Products
SETUP SEND
6 - 10
Setting Up Polled Transmit
Polled Transmit is when you set up your MFC to wait with an original so another
fax machine can retrieve it. (See
Interrupting Delayed Fax and Polled Transmit
Jobs
, page 6-10.)
1
Place the original to be retrieved face down in the ADF.
2
Press Function, 1, 3, 8.
3
Press or to choose POLLED TX:ON?,
and then press
Set
.
4
Press 1 to select DOC if you want your MFC to scan the printed original at the
time it is polled—OR—Press 2 to select MEMORY.
5
Press 1 if you want to select additional settings. The LCD returns to the SETUP
SEND menu—OR—Press 2 if you are finished choosing settings, and then go to
Step 6.
6
Press Start.
Interrupting Delayed Fax and Polled Transmit Jobs
You can send a fax or make a copy now, even if you have the MFC set to send
a fax later or to be polled. However, you cannot use automatic redial or the
Function mode.
1
Press Function, 1, 5.
2
Wait 2 seconds, and then remove the
original that is waiting in the ADF.
3
Place the “new” original you want to send or make a copy now in the ADF.
4
Enter the new fax number for the original you want to send now.
5
Press Start.
6
After the transmission is finished, place the “old” original back into the ADF.
7
Press Function, 1, 5, to restore the Delayed Fax or Polling job.
If you pressed 1 in Step 4, the printed original remains in the ADF until your
MFC is polled. However, you can “interrupt” it to send another fax.
POLLED TX:OFF?
SELECT <- -> & SET
1.DOC 2.MEMORY
INSERT ORIGINAL