Brother MFC 4300 Fax Machine User Manual


 
13 - 4
USING THE BROTHER MFC AS A PRINTER
Paper Tray
The MFC ejects paper with printed surfaces face down into the paper tray at the
front of the machine. When you use transparencies, remove each sheet
immediately after printing, to prevent a paper jam or curled sheets.
Simultaneous Printing/Faxing
Your MFC can print data from your computer while sending or receiving a fax,
or while scanning information into the computer. However, when the MFC is
copying or receiving a fax on paper, it pauses the PC printing operation, and
resumes when copying or fax receiving is complete. Fax sending continues
during PC printing.
Choosing Acceptable Paper
We recommend that you test paper, especially special sizes and types of paper
on the MFC before purchasing large quantities. See
Acceptable Paper, page 2-7
Avoid feeding labels with carrier sheets exposed, or your MFC will be damaged.
Avoid using coated paper, such as vinyl coated paper.
Avoid using preprinted or highly textured paper.
For optimum printing, use a recommended type of paper, especially plain paper and
transparencies. For more information on paper specifications, consult your nearest
authorized sales representative or the place where you purchased your MFC.
Use labels or transparencies that are designed for use in laser printers.
For the best print quality, we recommend that you use long-grained paper.
If you are using special paper, and the paper has problems feeding from the
multi-purpose sheet feeder, try again using the manual feed slot.
You can use recycled paper in this MFC.
Printer Operations
Job Cancel Key
You can clear data from the memory.