Filter
Top Products
ON-SCREEN PROGRAMMING
3 - 2
Alternating Displays
When you see alternating displays, the LCD sometimes alternates between the
currently selected option, and a help message giving brief instructions about
how to proceed. The display you’ll probably see most often is shown below,
showing you, when you place an original in the ADF, that you can dial a number
and send a fax, or you can make a copy.
Function Selection Table
If you have a basic understanding of how to program your MFC, you can
perform most of the programming settings without the Owner’s Manual. To
help you understand the function selections, options, and settings that are found
in your fax programs, use the Function Selection Table below.
1. Fax Functions
1. INITIAL SETUP
Function Description Factory Set
Page
1. DATE/TIME
Enter date and time for LCD
display and heading on
transmissions.
— 4-1
2. STATION ID
Program name, fax number
and elephone number to
appear on each transmitted
page.
— 4-1
3. BEEPER
Adjust volume level of
beeper.
LOW 4-4
4. SLEEP MODE
Conserves power 00 MIN 4-6
5. DELAYED TIMER
Sets the time of day that
delayed faxes will be sent.
— 4-6
6. VOLUME AMPLIFY
For the hearing-impaired,
you can set the volume to the
AMPLIFY: ON setting on a
permanent or temporary
basis.
OFF 4-5
7. TONE/PULSE
(Canada Only)
Selects dialing mode. TONE 4-2
8. LOCAL
LANGUAGE
(Canada Only)
Allows you to change the
LCD Language to French
ENGLISH See French
Owner’s
Manual
FAX: NO. & START
COPY: PRESS COPY