Filter
Top Products
INITIAL SETUP
4 - 2
4
Use the dial pad to enter your name (up to 20 characters), and then press Set.
(You can use the chart below to help you enter letters.)
5
Press Stop.
The LCD returns to the date and time.
Setting Tone/Pulse Dialing (Canada Only)
Your MFC comes set to accommodate tone (multi-frequency) dialing service. If
you have pulse (rotary) dialing service, you must change the dialing mode.
1
Press Function, 1, 1, 7.
2
Press or to select dialing mode,
and then press Set.
3
Press Stop to exit.
Entering Text
When you are setting certain functions, such as the Station ID, you will have to
enter text into the MFC. Most keys on the dial pad have three or four letters
printed above them. The keys for 0, # and don’t have printed letters because
they are used for special characters.
By pressing the appropriate number on the dial pad the correct number of times,
you can access the character you want.
If your Station ID has already been programmed, the screen prompts "1" to
make a change, or "2" to exit without changing.
Key once twice three times four times five times
2 ABC2A
3DEF 3D
4GH I 4G
5JKL5J
6MNO 6M
7PQRS7
8TUV8T
9WXY Z 9
DIALING:TONE?
SELECT & SET