Filter
Top Products
Source Route Configuration 4-57
Bridging
To open an existing Þle containing a Þlter set:
1. Click on . A menu will appear.
2. Click on Open…. A standard Microsoft Windows Open File window will
appear.
3. To specify the file:
• In the File name field, specify the file to open by path and name, or
• Use the Look in drop-down list box and associated file list to select the
desired file, and click to highlight it.
4. Click on Open.
The Þlters will appear in the Special Filter Database window, with all parameters
(File, Enable, Source and Destination Address, Data Type and Offset, Data Mask,
Receive Port, and Port Filtering Action) displayed as they were conÞgured at the
last Þle save.
Source Route Configuration
With the Source Route ConÞguration window, you can view address and routing
information, and set source route bridging parameters for bridging interfaces.
To access the Source Route ConÞguration window
from the Bridge Status window:
1. Click on the desired Port button ( ) to display the port menu.
2. Drag down to select Source Route Configuration…. The Source Route
Configuration window, Figure 4-16, will appear.
from the Chassis View window:
1. Click on the appropriate port index to access the Port menu.
2. Drag down to select Source Route Configuration…. The Source Route
Configuration window, Figure 4-16, will appear.