Filter
Top Products
Duplex Modes 4-67
Bridging
The Duplex Modes Window
The bridge-level Duplex Modes window allows you to enable and disable full
duplex mode capability for each bridging interface on your device. The window
lists each interface on the device and whether full duplex is ÒONÓ or ÒOFFÓ for
each interface.
To access the Duplex Modes window
from the Bridge Status window:
1. Click on to display the Bridge menu.
2. Drag down to select Duplex Modes…. The Duplex Modes window,
Figure 4-20, will appear.
from the Chassis View window:
1. Click on the Board Index of the device of interest; the Board menu will
appear.
2. Drag down to select Duplex Modes…. The Duplex Modes window,
Figure 4-20, will appear.
Figure 4-20. Duplex Modes Window
Duplex Modes Window Fields
The following information is displayed in the Duplex Modes window:
Interface:
Lists the bridging interfaces available on the device (Interface 1, Interface 2, and
so on).