Filter
Top Products
Using the Optional Dual Line
2-36
Getting Started
2
CF-PL Reference Guide_USEN HT1-2187-000-V.1.0
NOTE
This setting is available only after the optional Dual-Line Upgrade Kit is installed on
your machine.
6
Press [▼] or [▲] to display the desired setting ➞ press [Set].
The TX LINE SELECTION menu includes the following items:
An asterisk (*) indicates the default setting.
7
When you are finished, press [Stop] to return to the Standby
mode.
Switching Between the Two Lines
When you set <TX LINE SELECTION> to ‘MAN.’, you can switch between Line 1
and 2 by simply pressing [Fax/I-Fax] on the operation panel.
Item Description
TX LINE SELECTION
1.AUTO*
1.LINE 1
PRIMARY
SECONDARY
PROHIBIT TX
2.LINE 2
PRIMARY
SECONDARY
PROHIBIT TX
2.MAN.
1.DEFAULT TEL LINE
1.LINE 1
2.LINE 2
You can select a preferred line for sending faxes or
disable the transmission of outgoing faxes altogether.
The machine selects the idle line automatically. You can
preset which line has the priority when both lines are idle.
PRIMARY: The specified line will be preferably used for
outgoing faxes when both lines are available.
SECONDARY: The specified line will be used for
outgoing faxes when line priority line is in use.
PROHIBIT TX: The specified line will never be used for
outgoing faxes.
You can select the line to be used manually when
sending a fax by pressing [Fax/I-Fax]. The line you set
here is automatically used if you do not select a line
manually.
Set
Stop