A SERVICE OF

logo

Sequential Broadcasting to More Than One Location
3-28
3
Sending Documents
CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0
NOTE
You must dial the second destination within ve seconds of dialing the rst
destination. All subsequent destinations must be specied within 10 seconds of
each other.
If you wait longer than the timeout interval before specifying the next destination,
the machine starts scanning the documents. The timeout interval can be turned
OFF. (See TX (Send) Settings, on p. 11-14.)
3
After you have specied all of the destinations, press [Start].
The machine starts scanning the rst page into memory.
NOTE
Regardless of the order you used when dialing, the machine sends the document
to the destinations you specied in this order: one-touch speed dialing numbers,
coded speed dialing numbers, access code dialing numbers, regular dialing
numbers, then redialing.
To cancel Sequential Broadcasting, press
(Stop). After the message
<CANCEL DURING TX/RX> is displayed, press
( ) to cancel all destinations.
Start