Filter
Top Products
Restricting Machine Operation
4-9
Restricting the Use of the Machine
4
CF-PL Reference Guide_USEN HT1-2187-000-V.1.0
15
Enter the maximum number of pages that can be sent by the
registered department using the numeric keys ➞ press [Set].
NOTE
•
You can set the TX limit from 0 to 999999.
• If you set the TX limit to 0, no transmission can be performed by the department.
16
If you want to assign a sender’s name for the department,
press [▼] or [▲] until <4. SELECT SENDER> appears ➞ press
[Set].
NOTE
To use this feature, you have to register the sender’s names first. (See Chapter 1,
“Before You Use This Machine,” in the Facsimile Guide.) The sender name will be
printed on the document sent by the department as TX terminal ID.
17
Press [▼] or [▲] to select a sender’s name ➞ press [Set].
18
Repeat steps 8 to 17 to set restrictions for other Department
IDs and passwords.
19
When you are finished, press [Stop] to return to the Standby
mode.
NOTE
To operate the machine with restrictions ‘ON’, see “Operating the Machine with
Restrictions ON,” on p. 4-13.
➞
➞
➞
4
1
7
5
2
8
6
3
9
0
Set
Set
Set
Data
Registration
Stop