Filter
Top Products
Setting and Using the System Administrator’s ID and Password
4-4
Restricting the Use of the Machine
4
CF-PL Reference Guide_USEN HT1-2187-000-V.1.0
NOTE
You need to enter the System Administrator’s ID and password when you are using
Department ID management and want to operate the machine as the System
Administrator. In this case, you do not need to enter the System Administrator’s
password when accessing the SYSTEM SETTINGS menu. Otherwise, you need to
enter the System Administrator’s password every time you enter the SYSTEM
SETTINGS menu.
10
Press [Stop] to return to the Standby mode.
Changing/Canceling the System Administrator’s ID and
Password
Follow this procedure to change or cancel the System Administrator’s ID and
password.
1
Open all three one-touch speed dialing panels.
2
Press [Data Registration].
3
Press [▼] or [▲] until <6.SYSTEM SETTINGS> appears ➞ press
[Set].
4
Enter the current System Administrator’s password using the
numeric keys ➞ press [Set].
The current password is not displayed as you enter it.
➞
➞
Stop
Data
Registration
Set
4
1
7
5
2
8
6
3
9
0
Set