Filter
Top Products
List of LCD Display Messages (Alphabetical List)
7-19
Troubleshooting
7
CF-PL Reference Guide_USEN HT1-2187-000-V.1.0
ENTER DEPT. ID
Cause Department ID restriction has been set.
Remedy You have to enter the Department ID and password (if set) in order to operate
the machine.
HANG UP PHONE
Cause The transaction has completed, but the handset is not sitting completely on its
cradle.
Remedy Make sure the handset is sitting completely on its cradle.
MEMORY FULL PLEASE WAIT
Cause The memory is full.
Remedy Wait until the current document transmission is complete.
OUTPUT TRAY FULL
Cause The output tray is full of paper.
Remedy Pick up the printed pages in the output tray.
PRT ALT. PAPER SIZE? YES=( ) NO=(#)
Cause The size of the available recording paper loaded in a paper cassette does not
match the size of the document waiting to be printed.
;
Remedy 1 If you do not mind printing the document on a different paper size, press [ ].
Remedy 2 If you want to print on the correct paper size, press [Stop] ➞ load the correct
size paper ➞ press [Start].
REC. PAPER JAM
Cause Paper has jammed in a paper cassette or inside the printer.
Remedy Clear the paper jam. (See “Clearing Printer Feed Jams,” on p. 7-5.)
REPLACE CARTRIDGE
Cause The toner cartridge has run out of toner.
Remedy Replace the toner cartridge. (See “Changing the Toner Cartridge,” on p. 6-3.)