Filter
Top Products
Initializing the Automatic Document Feeder
7-4
Troubleshooting
7
CF-PL Reference Guide_USEN HT1-2187-000-V.1.0
Initializing the Automatic Document Feeder
If the document cannot be correctly fed into the automatic document feeder, follow
the procedure below to initialize the ADF.
1
Open all three one-touch speed dialing panels.
2
Press [Data Registration].
3
Press [▼] or [▲] until <7.ADJUST/CLEAN> appears ➞ press
[Set].
4
Press [▼] or [▲] until <2.INITIALIZING ADF> appears ➞ press
[Set].
The pick up roller inside the ADF is reset to its initial position.
5
Press [Stop] to return to the Standby mode.
➞
➞
Data
Registration
Set
Set
Stop