
Setting Up and Using a Standard Relay Unit
6-8
Using a Relay Network
6
CF-PL Facsimile Guide_USEN HT1-2188-000-V.1.0
4
Enter the two digit relay group number that you want to
change using the numeric keys ➞ press [Set].
You can also press [▼] or [▲] to select a relay group number.
The prompt <PASSWORD> will be displayed if you have previously set a
password. Proceed to step 5. Otherwise, proceed to step 6.
5
Enter the password (up to seven digits) using the numeric
keys ➞ press [Set].
If you have not previously set a password, proceed to step 6.
6
Press [▼] or [▲] to display the setting you want to change ➞
press [Set].
To change the settings for an item, follow the same procedure you used for the
initial setup of the relay group. (See “Setting Your Machine as a Relay Unit,” on p.
6-3.)
NOTE
• To delete an item, press (Clear) ➞
(Set).
• To turn ‘OFF’ the relay feature for the group and retain the group setup, press [▼] or
[▲] to display <10.RELAY B’CAST> ➞ press
(Set), and turn this feature ‘OFF’.
You do not have to delete the relay group to disable it temporarily.
• To change the password for your relay group, you have to first enter the old
password (it is not displayed as you enter it) ➞ press
(Set) ➞ enter a new
password (it is displayed as you enter it) ➞ press
(Set).
7
When you are finished making changes, press [Stop] to return
to the Standby mode.
➞
➞
4
1
7
5
2
8
6
3
9
0
Set
4
1
7
5
2
8
6
3
9
0
Set
Set
C
Set
Set
Set
Set
Stop