Filter
Top Products
Using the MP Tray
2-20
Getting Started
2
CF-PL Reference Guide_USEN HT1-2187-000-V.1.0
IMPORTANT
• Make sure that the leading edge of the paper is inserted all the way into the MP
tray until it stops so that it is below the paper feed roller. The paper sensor for the
MP tray is located to the right of the paper feed roller, when viewed from the front of
the machine.
• Please note the following points when loading small size paper:
- If the paper is not loaded correctly, the paper is not detected by the machine, and
a message appears asking you to load paper into the MP tray.
- Make sure that the paper stack is not higher than the load limit guides on the
paper guides.
- Make sure that the paper guides are set correctly. To print with the MP tray, you
also need to select the paper size in the MP TRAY menu. (See Chapter 5,
“Summary of Important Settings.”)
- Make sure that the paper is loaded correctly, and that the leading edge is fully
inserted into the main unit.
Paper Sensor
Paper Feed Roller
Load Limit Guide