Memory Sending
Memory sending is a quick and easy way to send a fax. The FAX-L250 scans the document into its
memory as it dials the fax number. If the line is free, the FAX-L250 begins sending the fax as it scans
the rest of the document.
The FAX-L250 has enough memory to store up to 90 pages (fewer if the document contains many
graphics or particularly dense text).
Follow the instructions below to send a document with memory sending:
Be sure to adjust the document feed lever before loading your document. See page 5-6
for details.
1
Prepare the document and load it, face down,
into the Automatic Document Feeder (ADF).
¶ Once the document is loaded, the LCD display
shows the following:
¶ If necessary, you can adjust the resolution and
contrast. See page 5-13 for details.
2
Dial the other party’s fax number.
¶ Use one of the dialling methods described on page 5-15.
¶ If you must first dial a digit to get an outside line (″9″, for example), add a pause after that
digit by pressing the REDIAL/PAUSE button, as shown in the example above.
MEMORY USED 0%
STANDARD
DOCUMENT READY
Currently used memory:
Current resolutian:
Standby to scan:
TEL= 9p5164886700
Ex:
Sending Faxes
5-18