Filter
Top Products
j What Happens When Fax/Tel Mode is Selected
* In Australia, the fax plays ″You are connected. Please hold.″ after answering.
You can select these options in the RX MODE submenu of the RX SETTINGS menu when Fax/Tel
Mode is selected. See below for details on changing the settings.
Type of call
Telephone charges
begin for caller.
RING START TIME
(Factory default setting
= 8 sec.)
F/T RING TIME
(Factory default setting
= 22 sec.)
Telephone Fax Fax
Sending document
manually
Sending document
automatically
FAX-L250 answers without ringing*
FAX-L250 listens for FAX TONE (For 8 sec.)
FAX TONE
detected
FAX TONE is not detected
FAX-L250 starts ringing
If you don’t pick up the handset (within 22 sec.)
F/T SW ACTION
Choose between:
RECEIVE (factory default setting) and DISCONNECT
RECEIVE
(Factory default setting)
Not all fax machines are capable of sending a FAX
TONE. For those cases if you set the F/T SW ACTION
to RECEIVE, the FAX-L250 switches to receive mode
automatically and starts receivng the document. If no
document comes in, it disconnects after approximately
35 seconds.
Document received
automatically.
(FAX TONE is detected and the
FAX-L250 switches to receive
mode.)
Pick up the handset
to talk.
DISCONNECT
FAX-L250 disconnects the call.
Receiving Faxes
6-6