Filter
Top Products
Message Error Code Cause Action
DOCUMENT READY – The document in the
Automatic Document Feeder
(ADF) is ready for scanning.
Send the fax, scan the
document, or make a copy.
ECM RX – The FAX-L250 is receiving a
fax using ECM.
Faxes can take longer to receive
when using ECM. Try turning
ECM off if you need to receive
quickly, or if you know your
local telephone lines are in good
condition.
ECM TX – The FAX-L250 is sending a
fax using ECM.
Faxes can take longer to send
when using ECM. Try turning
ECM off if you need to send
quickly, or if you know your
local telephone lines are in good
condition.
HANG UP PHONE – The handset is off its hook. Place the handset properly onto
its hook.
LOAD PAPER – The FAX-L250 is out of
recording paper.
Load paper in the sheet feeder.
Any documents received in
memory will then be printed
automatically.
MEMORY FULL #037 The FAX-L250’s memory is
full because it has received
too many documents, or a
very long or detailed
document.
Print out any documents that
are storedin memory. Then start
the operation again. See page
6-17.
The memory is full because
you sent too many pages at
once, or a very long or
detailed document.
Divide the document and send
each part separately. If the
memory contains any faxes, you
do not need to delete them.
Frequently Asked Questions
10-32