Filter
Top Products
Problem Possible cause Solution
The FAX-L250 cannot send a
fax using ECM? (continued)
ECM receiving on the receiving
fax machine may not be turned
on.
If the receiving fax does
support ECM reception, call the
other party and have them
check if ECM reception is
turned on.
Errors occur frequently while
sending faxes?
The phone line may be in poor
condition, or you may have a
poor connection.
Lower the speed at which the unit
starts sending faxes in the TX
START SPEED menu setting. See
page 12-15.
j Receiving Faxes
Problem Possible cause Solution
The FAX-L250 cannot receive
faxes automatically?
The FAX-L250 may not be set
to receive automatically.
For the FAX-L250 to receive
faxes automatically, it must be
in FAX ONLY MODE,
ANS.MACHINE MODE, or
Fax/Tel Mode. See page 6-3.
The FAX-L250 may have a
document in memory, leaving
very little or no memory.
available
Print out any documents stored in
memory. See page 6-17.
An error may have occurred
during reception.
Check the LCD display for an
error message. See page 10-30 for
a listing of the FAX-L250’s error
messages.
Print an activity report and look
for an error code.
The sheet feeder may be empty. Make sure the sheet feeder has
paper in it.
The telephone line may not be
connected properly.
Make sure all phone line
connections are secure.
Frequently Asked Questions
10-22