Filter
Top Products
TX SETTINGS
Name Description Settings
ECM TX Enable/disable error correction during transmission. ON/OFF
MID PAUSE SET Set the length of the pause you insert into a dialling sequence. 2 seconds (1 to 15)*
AUTO REDIAL Set whether the FAX-L250 redials if it fails to get a response
on the first attempt.
ON/OFF
REDIAL TIMES Set the number of retries. 2 times (1 to 15)**
REDIAL INTERVAL Set the period of time between rediallings. 2 minutes (2 to 99)***
TX ERROR RESEND Setwhether the fax redials if an error occurs while sending. ON/OFF
RESEND TX FROM Set which pages to resend if TX ERROR RESEND is on. ERROR & 1ST PG/
ERROR PAGE/ALL
PAGES
ERASE FAILED TX Set whether the fax in memory is erased if an error occurs
during sending but then it is resent successfully.
ON/OFF
AUTO START TX ON-Scanning starts 10 seconds after the last number is
entered when sending to multiple numbers (5 seconds if only
sending to one location.)
OFF-After entering the last number, press the
(START/COPY) button, or else the FAX-L250 will return to
standby mode after 60 seconds.
ON/OFF
(Default settings are shown in bold type)
* UK and Hong Kong: 4 seconds (04–11)
**UK and Hong Kong: 01–03, Australia: 01–02, Ireland: 01–04, New Zealand: 01–05
***Australia, Hong Kong, Malaysia: 01–99, New Zealand: 1 minute (01–99)
Accessing the TX SETTINGS Menu
12-9