Filter
Top Products
5
Press START/COPY, then press STOP to return
to standby mode.
j Network Switch System Operation
The procedure for using the network switch system is almost the same as when using the unit over a
normal telephone line. When you receive calls, however, the unit will respond slightly differently as
described below.
When you hear the telephone call ring pattern:
Pick up the handset and talk normally. If you hear a slow beep, it means the call is from a fax machine
trying to send a document. Press the
(START/COPY) button to receive the document. If you do not
pick up the handset, the unit continues to ring until the other party hangs up. If an answering machine
is connected, it takes over the call.
When you hear the fax call ring pattern (triple ring):
After the unit rings, it receives the document automatically.
If you want to receive a document without a ringing sound:
Make sure that the INCOMING RING setting is set to OFF. See page 12-11 for details.
14:30 FaxTel
Different Ways to Receive a Fax
6666666666666666666
6-15