Filter
Top Products
Resending a Document that Encountered an Error
If you get an error signal when sending a document from memory, you can try resending the document
to the same destination without having to scan it again.
■ Make sure that the ERASE FAILED TX setting in the TX SETTINGS is set to OFF.
See page 12-9 for details on changing the setting.
■ When the AUTO REDIAL setting in the TX SETTINGS is set to OFF, a document
that failed to be sent is also considered an error document.
1
Press FUNCTION, then MEMORY REF.
2
Use or to select MEM. RETRANSMIT.
3
Press START/COPY.
4
Use or to select the TX/RX number of the
document you want to resend.
¶ If you are not sure of the TX/RX number of the
document you want to resend, print the list of
documents stored in memory. See page 5-35 for
details.
FUNCTION MEMORYREF
FUNCTION
MEMORY REFERENCE
DELETE DOCUMENT
MEM. RETRANSMIT
TX/RX NO. _0001
TX/RX NO _0003
Sending Faxes
5-38