Problems Feeding Paper Into the FAX-L250 Sheet
Feeder
If you are having problems feeding paper into the FAX-L250’s sheet feeder, check the following table.
Whenever you correct one of these problems, be sure to remove the paper from the
sheet feeder and load it again. See page 2-33.
The following problems can also cause the paper to jam in the unit. See page 10-5 for instructions on
clearing paper jams.
Problem Possible cause Solution
Paper does not feed into the
FAX-L250?
The sheet feeder may contain
too many sheets.
Make sure the sheet feeder is
not filled past the limit. See
page 2-33.
Paper may not be inserted in
the sheet feeder correctly.
Make sure paper is inserted all the
way into the sheet feeder. See page
2-33.
Printing is skewed? Paper may not be stacked
correctly in the sheet feeder.
Make sure the stack of paper is
straight in the sheet feeder.
Make sure there are no gaps
between the stack of paper and
the paper guides. See page 2-33.
Make sure the paper exit path is
clear.
Frequently Asked Questions
10-18