Filter
Top Products
1-14
Flow of Copy Operations
Basic Copying
1
NOTE
• If there is a current job, the machine scans the original, and waits to print it. Printing starts when the current job is
complete.
• When the copy has been made, remove it from the output tray.
• If the Card Reader-C1 (optional) is attached, remove the Control Card.
(See Chapter 7, “Handling Optional Equipment,” in the Reference Guide.)
• If you have set up Department ID Management, press .
(See Chapter 1, “Before You Start Using This Machine,” in the Reference Guide.)
●
If the following screen is displayed:
Follow the instructions on the touch panel display, and press once for each original.
When scanning is complete, press [Done].