Filter
Top Products
1-62
Collating Copies (Finisher)
Basic Copying
1
• If you select [Double] (Left Staple):
• If you select [Saddle Stitch]:
IMPORTANT
• You cannot select the position to be stapled when the Finisher-J1 (optional) is attached. (See Chapter 8,
“Appendix,” in the Reference Guide.)
• When the machine is operating in the Saddle Stitch mode, you cannot use the Remote and Cascade copy,
Hole Punch, Two-page Separation, Cover/Sheet Insertion, Image Combination, Image Separation, Booklet,
Transparency Interleaving, Form Composition, and Page Numbering modes.
• Folds may appear differently depending on the type or quantity of paper.
NOTE
• Place the originals to be finished into a booklet in page order, as shown in the illustration above.
(See “Making Copies for Use as a Booklet (Booklet),” on p. 2-12.)
• [Saddle Stitch] can only be set when the 1 2-Sided or 2 2-Sided mode is selected.
(See “Two-Sided Copying (Two-Sided),” on p. 1-75.)
Copy Set 1
Originals
Three Sets of
Specified Copies
Copy Set 2
Copy Set 3
Copy Set 1
Originals
Three Sets of
Specified Copies
Copy Set 2
Copy Set 3