Filter
Top Products
3-2
Copy Settings Table
Setting/Storing Specifications of the Copy Function
3
Copy Settings Table
The following items can be stored or set in Copy Settings from the Additional Functions screen.
NOTE
• An asterisk (*) indicates the factory default setting.
• *1: Not displayed when the Finisher-J1 is attached.
• For instructions on how to set the modes not described in this manual, refer to the appropriate Operation Manual
listed at the beginning of this Copying Guide. (See “Manuals for the Machine,” on p. ii.)
• The Copy Settings screen is made up of several screens. Use [
▼
] and
[▲] to scroll to the screen you want,
and make the required settings.
Additional Functions Available Settings Applicable Page
Copy Settings
Standard Key 1, 2
Settings
All modes (No settings*) p. 3-3
Auto Collate On*/Off p. 3-5
Image Orientation
Priority*
1
On/Off* p. 3-6
Job Duration Display On/Off* p. 3-7
Auto Orientation On*/Off p. 3-8
Photo Mode On/Off* p. 3-9
Standard Settings Store, Initialise p. 3-10
Store Remote Device
Store (Max 7 printers), Details, Erase,
Move To Top
p. 3-14
Remote Device
Transmission Timeout
5 to 30 sec., 30 sec.* p. 3-19
Initialise Copy Settings Initialise p. 3-20