Filter
Top Products
1-60
Collating Copies (Finisher)
Basic Copying
1
Collating Copies (Finisher)
The Finisher mode can be selected to collate copies in various ways, either by pages or copy sets.
The copied paper is output as face down.
NOTE
• When envelopes, tracing paper, transparencies, or labels are selected, the Finisher functions cannot be set.
• When heavyweight paper, letterhead, or bond is selected, the Staple or Hole Punch mode cannot be set.
Below is a list of the finishing functions and paper sizes available for each optional unit.
*1 If Tray A is selected as a designated tray from the Additional Functions screen ➔ Common Settings ➔ Tray Designation
screen, Offset is applied. If it is not selected, Rotate is applied.
*2 Stapling position cannot be selected.
Optional units Offset Rotate
Staple
Hole
Punch
Corner Double
Saddle
Stitch
None –
A4, A4R,
A5, A5R
––– –
Finisher-J1
A3, A4,
A4R, A5
–
*2
A3:
15 sheets;
A4, A4R:
30 sheets
–––
Inner 2way Tray-A1
–
A4, A4R,
A5, A5R
––– –
Copy Tray-F1
Saddle Finisher-G1
*1
A3, A4,
A4R, A5
*1
A4, A4R,
A5, A5R
A3:
25 sheets;
A4, A4R:
50 sheets
A3:
25 sheets;
A4, A4R:
50 sheets
A3, A4R:
10 sheets
–
Puncher Unit-J1
A3, A4,
A4R:
2 holes;
Puncher Unit-G1
A3, A4:
4 holes;
: Setting available
–: Setting unavailable