Filter
Top Products
2-17
Making Copies with Sheets of Paper Interleaved Between Transparencies (Transparency Interleaving)
Additional Copy Functions
2
Making Copies with Sheets of Paper Interleaved
Between Transparencies (Transparency Interleaving)
Use this mode when copying onto transparencies fed from the stack bypass. The machine
automatically interleaves a sheet of paper between each transparency. The interleaf sheets
protect the copied surface of the transparencies. They can also be printed with the same
images as the transparencies or left blank.
IMPORTANT
• When the machine is operating in the Transparency Interleaving mode, you cannot use the Remote or Cascade
copy, Finisher, Two-Sided, Two-Page Separation, Cover/Sheet Insertion, Image Combination, Image Separation,
Booklet, Image Repeat, Mirror Image, Form Composition, and Page Numbering modes.
• You cannot make more than one set of copies at a time in the Transparency Interleaving mode.
• Even if your machine is equipped with the Finisher, you cannot use any of the Finisher modes with the
Transparency Interleaving mode.
NOTE
• The machine’s counter does not count blank interleaf sheets as copies.
• Transparencies are output into Tray A when only Inner 2way Tray-A1 is attached, and into Tray B in the case of
Saddle Finisher-G1, even if the other tray is specified as a designated tray.
■
Blank Interleaf Sheets Selected in the Transparency Interleaving Mode:
Outputs a printed transparency and a blank interleaf sheet alternately.
Originals
Copies
Transparencies
Blank Interleaf
Sheets