Filter
Top Products
show pagp
CF-776
Cisco IOS Configuration Fundamentals Command Reference
July 2008
show pagp
To display port-channel information, use the show pagp command in user EXEC or privileged EXEC
mode.
show pagp [group-number] {counters | internal | neighbor | pgroup}
Syntax Description
Defaults This command has no default settings.
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines You can enter any show pagp command to display the active port-channel information. To display the
nonactive information, enter the show pagp command with a group.
The port-channel number values from 257 to 282 are supported on the CSM and the FWSM only.
Examples This example shows how to display information about the PAgP counters:
Router# show pagp counters
Information Flush
Port Sent Recv Sent Recv
--------------------------------------
Channel group: 1
Fa5/4 2660 2452 0 0
Fa5/5 2676 2453 0 0
Channel group: 2
Fa5/6 289 261 0 0
Fa5/7 290 261 0 0
Channel group: 1023
Fa5/9 0 0 0 0
group-number (Optional) Channel-group number; valid values are a maximum of 64 values from 1
to 282.
counters Displays the traffic information.
internal Displays the internal information.
neighbor Displays the neighbor information.
pgroup Displays the active port channels.
Release Modification
12.2(14)SX Support for this command was introduced on the Supervisor Engine 720.
12.2(17d)SXB Support for this command on the Supervisor Engine 2 was extended to
Release 12.2(17d)SXB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.